Hải li -

JET Technology

Aircraft technology is used to component design the airflow system of the air conditioner.

Memory Flap

While the flap is swinging, it can be stopped at any angle desired. The flap returns to the position that it was in when operation last stopped.

Auto Flap Mode

Whatever the operating mode is, the unit automatically selects the optimal angle.

Memory Flap

While the flap is swinging, it can be stopped at any angle desired. The flap returns to the position that it was in when operation last stopped.

Eco Operation

Room temperature and humidity are monitored using a sensor to automatically control the operation. In tandem with the human sensor, the system enables a energy saving mode while maintaining comfort.

Fuzzy Auto Mode

Automatically, the unit determines its operating mode and temperature setting based on a fuzzy calculation, and adjusts the inverter frequency.

Self Clean Operation

The operation is operated for 2 hours after the unit has stopped its normal operation. The indoor unit is dried up and growth of mold is restrained.

High Power Operation

The unit can operate continuously in "HI POWER" mode for 15 minutes. This mode isconvenient to reach the desired temperature Auto quickly.

Automatic Operation

The air conditioner automatically selects from heating, cooling or dry operation.

Dry Operation

The unit dehumidifies the room by intermittent cooling operation.

24-hour On/Off Programmable Timer

By combining a start timer with a stop timer you can register two timer operations a day. Once set timers will start or stop the system at the specified time of the day repeatedly.

Off Timer

The unit stops at the specified time.

On Timer

This enables the operation to start a little earlier so that the room is near to set temperature at ON time.

Sleep Timer

The room temperature is automatically controlled during the set sleep mode period, ensuring that room temperature will not get too cold or too hot.

Comfort Start-up

In ON-TIMER operation, the unit automatically starts the operation a little earlier, so that the room can approach optimum temperature at ON time.

Back-up Switch

On the indoor unit there is a back up on/off switch. The system will operate in the previous mode.

Auto Restart Function

Power blackout auto restart function records the operational status of the air conditioner immediately prior to being switched off by power supply interruption. The unit automatically resumes operations in that mode and temperature set point after the power has been restored.

Luminous Button

With wireless “Luminous” remote controls that even “glow in the dark”, it is possible to operate all desired functions of the unit with the click of a button.

24-hour ION

The air conditioner body has a tourmaline coated sheet. Negative ions (2,500 -3,000/cc) are generated when the air conditioner is not running, allowing you to experience them without incurring any electrical cost.

DC PAM Inverter

An inverter system has a number of advantages over a constant speed system. Its variable speed compressor outputscan ensure quick cooling or heating after start up and attains a set temperature more quickly. The air conditioner canslow down the compressor speed to save energy whilst keeping comfortable conditions. The compressor is DC motordriven so it provides higher performance.

Self-Diagnostic Function

In the case that the air conditioner malfunctions, an internal microcomputer automatically runs a self-diagnosis. (Inspection and repair should be performed by authorized dealers.)

FUNCTIONS

Products

Services

About Us

Contact Us

Policies

HCM headquarter

Ha Noi brand office